Introducing the ATS Racing Intake Manifold!
After years of R&D we have finalized the ultimate intake manifold for the 91-95 Toyota MR2.
We start with a stock 2nd gen. intake manifold, machine off the stock plenum, and have the stock runners cleaned. Then we weld on our CNC machined port adapter plate, which helps blend the airflow from the larger plenum into the runners. Next we add a much larger plenum calculated to increase HP and TQ, while still retaining factory "spool". Finally we attach your choice of either a center-feed or side-feed throttle body flange. That's it! You now have the low RPM benefits of the stock runners and the High HP capacity of a much larger plenum with zero compromises anywhere in the RPM range.
Have you ever had someone look at your engine bay and say "Man, that thing is a twin-turbo!!, my buddy used to have one of these!!" Stop these embarrassing conversations forever, by getting rid of that old nasty stock plenum.
Your probably thinking that there is no way something this amazing could be less that $1000, but you'd be wrong! It's not even $800! Or $600. The ATS Racing Intake manifold is only $500, yes, you read correctly, no need to get your eyes checked, it's only $500. Call the number on your screen now!!!... or maybe just hit the paypal button below.
Ok, so if you already skipped below you know the cost IS $600, but $100 of that is refundable when we receive your un-molested stock intake manifold.
Dyno results show a HP and TQ increase after 3700 RPM all the way to an 8000 RPM redline with zero losses before 3700 RPM.
ATS Racing Center-feed Intake Manifold $500 + $100 core charge. If you have ported or extrude-honed runners and want to send us your intake manifold in advance, let us know and we'll refund the core charge after you order. See core notes
ATS Racing Side-feed Intake Manifold $500 + $100 core charge. If you have ported or extrude-honed runners and want to send us your intake manifold in advance, let us know and we'll refund the core charge after you order. See core notes
Edelbrock TB with installation kit includes:
Edelbrock race TB 70 or 75mm (choose below)
Modified steel throttle rotor
Throttle cable bracket
Correct TPS sensor
Gasket
Hardware
3 pin weather pack connector
70mm Edelbrock throttle body with installation kit $350
75mm Edelbrock throttle body with installation kit $370
91-92 Stock throttle body installation kit $100,
includes:
Short ATS TB inlet to clear the intercooler pipe
Adapter plate from 75mm to stock
Gasket for adapter to manifold
necessary hardware
93+ Stock throttle body installation kit $120, includes:
Short ATS TB inlet to clear the intercooler pipe
Adapter plate from 75mm to stock
Gasket for adapter to manifold
Throttle cable bracket, and all necessary hardware
Add an ATS phenolic TVIS Spacer for $125, Regular price is $175 SAVE $50!
*Pricing is with purchase of intake manifold only*